Ver cesta (0 Producto) Mi cuentaMostrar lista de la compraIr a caja

Water Reducer

Water Reducer 310

Description, with changes: Water Reducer 310 is a unique and powerful powdered polycarboxylate plasticizer designed to significantly reduce water requirements. Water Reducer 310 will make even the most stubborn mixes flowable but must be carefully managed to avoid segregation of mix components.

Dosage Rate: 0.05%- 1.5% of Cement Weight

The ultimate indicator of an overdosage of plasticizer is segregation of the mix. Make test batches prior to production to ensure optimum dosage. Water Reducer 310 has 10 times the potency of Water Reducer 205.

(Formerly Super Flowz)

Adding Water Reducers will increase workability of concrete mixes that have a low water to cement ratio. Maintaining a low water to cement ratio is critical for reaching optimal strength in the cured matrix. Read our FAQ on selecting the correct Water Reducer here: Using Water Reducers In Artisan Concrete

Water Reducer 205

Description, with changes: Water Reducer 205 is a powdered polycarboxylate based plasticizer and pozzolan blend. It is a dry, white, multi-component material that can also replace pozzolan in certain mix designs. Ideal for use in GFRC face and backer coats, or as a water reducer in any concrete formulation. This unique blend offers both water reducing capability as well as pozzolanic benefits, improving the workability, strength and durability of concrete.

Dosage Rate: 0.5 - 10% of Cement Weight

Water Reducer 205 has a wide range of dosage rates, depending on the application and mix. In GFRC face coats, use the lower end of the dosage range, typically 2-6 grams per 1 lb. (0.45 kg) of cement used. In wetcast mixes, dosage ranges can approach 10% of the cement weight. The ultimate indicator of an overdosage of plasticizer is segregation of the mix. Make test batches prior to production to ensure optimum dosage.

Water Reducer 205 is 10% as potent as Water Reducer 310.

Adding Water Reducers will increase workability of concrete mixes that have a low water to cement ratio. Maintaining a low water to cement ratio is critical for reaching optimal strength in the cured matrix. Read our FAQ on selecting the correct Water Reducer here: Using Water Reducers In Artisan Concrete

Ayuda para elegir

Todos nuestros productos enumerados por aplicaciones: "Lifecasting", Escultura, Moldes, Fundición, Maquillaje FX, Réplicas, Dientes y Kits de aprendizaje.

  • Moldes

    una amplia gama de materiales rígidos y flexibles para fabricar moldes de: Silicona, caucho de Poliuretano, resina de Poliuretano, Poliester, yesos especiales, etc.

  • Réplicas

    Materiales flexibles y rígidos para colar en el interior de los moldes. Aqui encontrará resinas bicomponentes de poliuretano, epoxi y poliester en diferentes durezas. Así como espumas rígidas y flexibles, etc.

  • special properties

  • Espumas

    Espuma flexible líquida, Espuma rígida líquida, Bloques de espuma rígida

  • Composites

    Resinas de poliester para laminar, resinas de colada, gelcoat, masillas, pastas y accesorios.

  • Restauración

    una amplia variedad de materiales para la restauración de ornamentos en edificios. Se pueden utilizan tanto en el interior como en el exterior.

  • Prototipos

    Materiales utilizados para prototipado rápido

  • Acabados & Fundición

    Todos los productos que Usted necesita. Aquí encontrará las resinas que puede utilizar, polvos metálicos, cargas, pátinas, etc.

  • Textil

  • Plásticos para Brocha

    Plásticos que se pueden aplicar con brocha sobre esculturas hechas en Poliestireno o en espuma de poliuretano.

  • Cosplay

    Products to make your own Cosplay Costumes and Props!

  • EZ Spray Productos

    is a spraysystem for rubbers, plastics and foams. Saves time & labor costs over hand-application methods

Información Contacto Tarifas de envío Proyectos Clientes Marcas Aplicaciones Branches

su ventanilla única para materiales de modelado en 3D