NOVOCS™ Matte
Buy Smooth-On at FormX
Smooth-On es uno de los principales fabricantes mundiales de materiales de modelado 3D, como materiales para la fabricación de moldes, fundición y efectos especiales, pero también resinas, adhesivos y equipos de fundición industrial. FormX es el principal distribuidor de productos Smooth-On en toda Europa.
Los solventes NOVOCS™ son solventes de silicona de baja viscosidad que se evaporan rápidamente. NOVOCS™ es particularmente útil para diluir la base de pintura de silicona Psycho Paint® y aplicarla con pincel o aerógrafo a accesorios y prótesis de goma de silicona platino endurecida. Cuando se usa como solvente para diluir pinturas de silicona o recubrimientos superficiales, NOVOCS™ Matte dejará un acabado mate.
ADVERTENCIA: Líquido y vapores INFLAMABLES. Mantener alejado de fuentes de ignición y seguir precauciones para el manejo de sustancias inflamables.
- Read the safety information label. Click on the image
- Lees het veiligheidsinformatie label. Klik op de afbeelding.
- Lesen Sie das Sicherheitsinformationsetikett. Klicken Sie auf das Bild.
- Lisez les informations de sécurité cliquez sur l'image
- Lea la etiqueta de información de seguridad. Haga clic en la imagen
- NOVOCS™ solvents do not contain VOCs.
- NOVOCS™ solvents are low viscosity silicone solvents that evaporate quickly.
- NOVOCS™ Matte leaves a matte finish.
Important - Shake the NOVOCS™ container well before use.
Materials should be stored and used in a warm environment of 23°C. This material has a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize the risk of contamination.
Mix the A and B components of two-component silicone systems before adding NOVOCS™. Add the desired amount of NOVOCS™ solvent to create a thinner silicone mixture that can be brushed or airbrushed onto the surface of a cured silicone casting.
Example recommended proportions for use:
When added to Psycho Paint, add between 200%-400% NOVOCS™ solvent by weight
When adding to Sil-Poxy, add between 300%-500% NOVOCS™ solvent by weight
Because no two applications are alike, a small test application is recommended to determine suitability for your project if the performance of this material is compromised.